User Tools

Site Tools


mixer_eq_kill_switches

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

mixer_eq_kill_switches [2019/05/13 14:30] (current)
123 created
Line 1: Line 1:
 +====== Mixer Equalizer kill switches ======
 +===== Overview =====
 +{{::​mixer-eq-kill-switch.jpg?​nolink|}}
 +
 +Each of the mixer’s 3 band equalizer knobs has a kill switch function which when activated **cuts all the frequencies for the corresponding range** (High, Mid or Low) from the audio signal playing through the channel. This effect can also be achieved by turning an equalizer knob all the way counter-clockwise,​ but the kill switch function allows for fast and easy toggling.
 +
 +While the kill switch is active, a **LED ring** on the bottom of the equalizer knob will **illuminate**. If the knob is turned while the kill switch is active, the LED ring will flash to indicate that the adjustment has no effect.
 +
 +----
 +
 +===== Default controller bindings =====
 +
 +To activate the kill switch on an equalizer knob, simply hover over the knob and use the input action listed below to toggle the kill switch on or off.
 +
 +**SteamVR** default controller binding for [[steamvr_input|Rotary Knob Press]] action:
 +  * **HTC Vive:** Trackpad press
 +  * **Oculus Touch:** Thumbstick press or Button X / A press
 +  * **WindowsMR:​** Trackpad or Thumbstick press
 +
 +**Oculus** default controller binding:
 +  * **Oculus Touch:** Thumbstick press or Button X / A press
  
mixer_eq_kill_switches.txt · Last modified: 2019/05/13 14:30 by 123