mixer_input_control_overview

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mixer_input_control_overview [2020/08/04 20:13]
123 [1. Master level / volume control]
mixer_input_control_overview [2020/08/05 10:50] (current)
123 [4. Channel Filter]
Line 35: Line 35:
 The filter knob combines a **low and high-pass filter**.  The filter knob combines a **low and high-pass filter**. 
  
-Turning the knob **clockwise** from the 12 o’clock position activates the **high-pass filter** (HPF), increasing the cutoff frequency from 20 to 22000hz when completely turned. +Turning the knob **clockwise** from the 12 o’clock position activates the **[[https://en.wikipedia.org/wiki/High-pass_filter|high-pass filter]]** (HPF), increasing the cutoff frequency from 20 to 22000hz when completely turned. 
  
-Turning the knob **counter-clockwise**, actives the **low-pass filter** (LPF), decreasing the cutoff frequency from 22000hz down to 20hz.+Turning the knob **counter-clockwise**, actives the **[[https://en.wikipedia.org/wiki/Low-pass_filter|low-pass filter]]** (LPF), decreasing the cutoff frequency from 22000hz down to 20hz.
  
 While the **filter is active**, the LED ring on the bottom of the knob will be **illuminated in blue**. While the **filter is active**, the LED ring on the bottom of the knob will be **illuminated in blue**.
  • mixer_input_control_overview.txt
  • Last modified: 2020/08/05 10:50
  • by 123