turntable_settings

Turntable Settings

These settings allow users to configure how the turntables handle.

For example, setting the Slipmat Friction to high and the Motor Start / Stop Speed to instant, will make the turntables handle a lot more like a CDJ (in vinyl mode) than a regular turntable.

  • Slipmat Friction: Controls how fast the slipmat (and the attached vinyl record) matches the speed of the platter after being released.
  • Motor Start / Stop Speed: Controls how fast the platter will accelerate to its target speed. A higher setting will result in less audible distortion when the record begins to play.
  • Motor Power-Off Brake Speed: Controls how long it takes for the platter to come to a complete stop after the turntable’s power is turned off.
  • Platter Pitch Bend Sensitivity: Controls the amount the pitch / playback speed changes when grabbing and moving the platter’s edge.
  • Spindle Pitch Bend Sensitivity: Controls the amount the pitch / playback speed changes when using the turntable’s spindle.

Apart from being able to load custom slipmat designs, the turntable’s appearance can also be changed in other ways.

  • Color Scheme: Select which turntable color scheme to use.
  • Display BPM Metadata on Pitch Slider knob: Display the track’s BPM metadata (if available) while hovering over the pitch slider’s knob.
  • Display Key Metadata on Pitch Slider knob: Display the track’s Key metadata (if available) while hovering over the pitch slider’s knob.
  • turntable_settings.txt
  • Last modified: 2019/11/21 09:51
  • by 123